Problem map Alfa Romeo Mito 1.6 jtdm2

[Racer83]

the bit to disable the egr are not recognized by the ecm, then with the map that gives you don't do anything, if you want advice find the sw on the veb and try to use that, it is not perfect but gives you an idea of how they are modified files to egroff and fapoff.

Thanks!! I'll try it then

[Errecinque]

If ugo confirms that all of the changes to the outside of the maps that recognizes the driver in the ecm are right for the beheaded, and egr just stating ori all the edited maps that you find in the drivers, and behold them that you have your ori with luca stanca and egr. Of course, if there are more bit or less to change if you can't download the file, ugo will become more difficult and you also would like to say that you did not have on a file defappato well.

[Racer83]

If ugo confirms that all of the changes to the outside of the maps that recognizes the driver in the ecm are right for the beheaded, and egr just stating ori all the edited maps that you find in the drivers, and behold them that you have your ori with luca stanca and egr. Of course, if there are more bit or less to change if you can't download the file, ugo will become more difficult and you also would like to say that you did not have on a file defappato well.

in fact, from the 2d I have seen that there are maps that the driver in the ecm does not recognize, and then I don't know if they are just, and, above all, I don't know what egr and luca stanca, then I don't know which tap.
If I could take the file made by ugo, I would have compared it with my mapped it and I took all that different from you, or from and just.
One piece at a time I will understand

[Racer83]

This is the file ori with egr closed.
It closed well?

[ugoboss]

ok, go ahead.

[Racer83]

Out of curiosity, but then the driver of the EGR that I get from the ECM is nothing???
Tonight I will try to do luca stanca!

[tranky]

Out of curiosity, but then the driver of the EGR that I get from the ECM is nothing???
Tonight I will try to do luca stanca!

on these ECU's often have under "torque limiter" the part of the EGR.. not to sure the name of the maps spouting ecm.

[Racer83]

on these ECU's often have under "torque limiter" the part of the EGR.. not to sure the name of the maps spouting ecm.

This makes me think that the other maps could relate to who knows what... so it goes a bit adrift! as I understand what you refer to, and what do they do? recognizing them with the 2d??

[tranky]

This makes me think that the other maps could relate to who knows what... so it goes a bit adrift! as I understand what you refer to, and what do they do? recognizing them with the 2d??

Exact!
Alternatively, with the Damos in WinOLS, you can have the feedback of the functionality of the maps.

[Racer83]

Exact!
Alternatively, with the Damos in WinOLS, you can have the feedback of the functionality of the maps.

and then I will have to see a lot of maps
with winols I find it even less...