generic software for ELM 327

[DavideO]

Yes if you search the web there are several guides..if you try to download alfa obd and crush help c is the scheme..I have done that in the Kline I had to remove a resistor and put a switch bipolar between 1 9 and 6 are 14, but you can do for all those who want to

[albertoS4]

You can physically modify the elm 327 to ****llo of hardware, with usb, for not having to buy adapters

I know you can build the adapters, but I don't know if you can do so by not having to change from time to time...
the edit that I meant I was concerned with the 120 Ohm resistor that needs to be removed from the ELM327 clone, otherwise it does not communicate at all... (test on Grande punto NP)

[DavideO]

Yes the resistor needs to be removed otherwise it should not be..no I have put a switch on the diverter of the classic ones with changes from normal to yellow cable to enter the body so it is more practical..but if you are looking for c is also a video guide on the tube

[X4N]

I saw that there are welding to do..and I have no equipment.
To be able to reset service etc, which adapter should I take? I have an elm327 clone.
Thanks

[DavideO]

For the 147 you have to enter in the body you need the yellow cable, but before taking the test without some elm connect already with the k line

[X4N]

For the 147 you have to enter in the body you need the yellow cable, but before taking the test without some elm connect already with the k line

I have an ELM327 v1.5, but could you tell me if the free version of multiecuscan can do that?

[todos]

I have an ELM327 v1.5, but could you tell me if the free version of multiecuscan can do that?

you the free version works with ELM327 v1.5 but very limited...

[DavideO]

I don't have multiecuscan I can not say..I personally l elm l I've only used it on android devices..in my c was a cd with the programs I have installed, but I never got to try it..if there is you have you might see if you can with those programs..

[ugoboss]

Yes the resistor needs to be removed otherwise it should not be..no I have put a switch on the diverter of the classic ones with changes from normal to yellow cable to enter the body so it is more practical..but if you are looking for c is also a video guide on the tube

do you have a picture of the resistance to remove, or a precise indication ,thanks.

[DavideO]

20160418_105309.jpg this is my! the resistance is named r04 I tried to put an arrow with the pencil tool should be nowhere in sight! not all of the elm are the same, however, is the one between pin 6 and 14 following the tracks you should find it easily!