and I forgot the attachmentALPHA 156.rar
and I forgot the attachmentALPHA 156.rar
If you have a family that loves you, few good friends, food on the table, a roof over your head,you're richer than you think!
Have faith..
Put in place Injection zoned (1) you started too early to load parts from 44-50%
Rail pressure not lai touched the limiters do not have the same increments of 500 or 1000 ? Cattura.jpg
Injection split Boost 1&2 do not have the same increases put in place (10-18 %
25-35 %)
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
If you want to tap the pedal for me is fine... Cattura.jpg you will have to lower the increments the data at the time of inj
but from many tests performed, I will say that a ecu deceived, and much more lively that a ecu informed..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
I do not understand the fact of not touching the map the pedal,the iq as you?only through time?
from that little experience,mod. maps pedal "curing"time with a low smoke and a decent yield,then if we are the "groundwork"to be able to go further than you go in with plenty of time.
for the "chronicle" the other map pedal:78200 and the limit.78272
Therefore, I realized now that I haven't seen all of the points that you wrote me (watch from your phone, it makes things a bit confusing)... So this afternoon I make good....however, I know that there is something in my use of interpolation is not to be...therefore, there are 4 boxes...I sign the minimum value in both of the boxes on the left and the highest on both of those right....is right or is wrong?....then, with regard to inform or to deceive the ecu, and there is who says that on edc15 there are results more efficient by informing the ecu....however, I want to learn both ways ;D
If you have a family that loves you, few good friends, food on the table, a roof over your head,you're richer than you think!