Luca stanca 500 1.3 MULTIJET 75hp

[Errecinque]

Meanwhile, he began to buy the tool (kess, and jtag)

Do not give info inaccurate the mistake if it is at the beginning......Kess ok, but jtag is a method of reading an instrument. what is the Ktag and if he wants an equipment multi-purpose the must buy both.

[pippo65]

Ok guys I see that you are very available,and for this I thank you very much.
From what I understand the problem bigger is the beckup that I would serve in the case goes wrong something......am I right?
With regards to the kess with what I can from the obd to read/write my ecu???
If you are using the online service I would be able to complete the job?
On the laptop I have ecm titanium 1.61 may be useful?

[mafani]

then I had to grade:
-the backup is useful if the writing doesn't go to good end
-the k**s from the obd you reads and writes as I have already said before, the two types of ecu (of course, if the inside has the original file)because it does not read the ecu but does a virtual reading
-the online service makes you edit the file that you're going to write to the ecu
-ecm tita is a sw map editing,you may find it useful to modificarti the file only if you know the areas to touch

[pippo65]

then I had to grade:
-the backup is useful if the writing doesn't go to good end
-the k**s from the obd you reads and writes as I have already said before, the two types of ecu (of course, if the inside has the original file)because it does not read the ecu but does a virtual reading
-the online service makes you edit the file that you're going to write to the ecu
-ecm tita is a sw map editing,you may find it useful to modificarti the file only if you know the areas to touch

But, in theory, the original file should have it in the database, the software of the k**s.... or I tell a joke?

[michele30]

Hi, the original file can't find it on the kess it on other hw, however, are in the database.
If you are interested I sell galletto v54 again, ( there's my post in the section I sell ) the read and write quietly.,

[Errecinque]

Hi, the original file can't find it on the kess it on other hw, however, are in the database.
If you are interested I sell galletto v54 again, ( there's my post in the section I sell ) the read and write quietly.,

I do not know....both the cock and the kess have in the sw a database file that at the time of id do ecu if it is present returns a virtual read.

[leo_sg]

Do not give info inaccurate the mistake if it is at the beginning......Kess ok, but jtag is a method of reading an instrument. what is the Ktag and if he wants an equipment multi-purpose the must buy both.

You I'm sorry I'm confused, and I was wrong to write..
however, with these two tools start to battle in this world very interesting, and there will be always something to learn

[todos]

Hello all,I intend to delete from the ecu, the fap and egr from the above-mentioned drive.
So, being the very first weapons I ask for a help to the more experienced on the necessary material.
The cinquino has on an ecu marelli nevertheless 8df.c2
Thanks!!!

you should practice with a unit from breaking, and not that of your machine if you are in the first arme...

[leo_sg]

you should practice with a unit from breaking, and not that of your machine if you are in the first arme...

however, in your machine you can do any test you want, and you realize better the differences and if you should do some damage at the end and your..
I think so

[pippo65]

you should practice with a unit from breaking, and not that of your machine if you are in the first arme...

I have read in the thought?
In fact, it is what I want to do,but I'm at the point what to take??? Gallo or kess?
A control unit to break-in than I is to cost?