I don't know if the topic has already been covered, but I would like to know if there is the possibility to retract the piston of the electric brakes via the elm327, what that diagnosis type autocom seems to me to be able to do that already, and so avoid the "splash" with the appropriate key.
Thanks
Elm I don't know if it has that function, why do not I use, but those pistons should be in arrears only with diagnosis, not manually
I think it is more a matter of the sw and still manually the piston must be "unscrewed" even with the special tool that has a kit with different adapters for different brands, and then in the specific I do not know if on some cars it is obligatory to do it only through diagnosis.Originally Written by aleg
Hello, if locked, for some reason, no, normal, which everything works with one diagnostics tool you can move back...
Ok, but what sw do you use?
For curiosity, what car are mounted with electric brakes? And the pistons are not driven hydraulically? That is how it works roughly this system?
What is backward and the motor of the hand brake after pushing the plunger manually after you have fitted the brakes you have to bring the starter motor to the new position by diagnosis
is exact, I usually do it via vcds
Example vw passat I use a tecnotest or an axone, I don't know if there is any sw that can't do with the elm 327..in that case, are hydraulic pliers normal with behind only the electric motor for the hand brake ..if not the arretri before the diagnosis is wrong ..it breaks
Elm does not, does any diagnosis Good, but I agree with elm...
Write permission
Quote
