Page 1 of 3 123 LastUltima
Results 1 to 10 of 27

Discussion: problem of bmw 330 xd

View Hybrid

  1. #1
    THE AVERAGE USER
    Date Of Registration
    Mar 2014
    Messages
    86

    problem of bmw 330 xd

    Hello all, I have a problem with a bmw 330 xd e91 engine type M57 306d3 170kw. The machine suddenly turns off at 1500 and will not come out no error. The pressure of the fuel is low and high is perfect, the sensor of turns is new, the pressure regulator is new, injector is new that was broken. I checked with the oscilloscope the signals of the sensor of turns, the phase of the injectors and they are all regular. When you turn off the engine, the diagnosis remains active, I have used both bosch texa but does not detect any error. The flaw it makes is that you rounds plan, and if you sink the throttle, to about 1500 off. Any idea?

  2. #2
    BEGINNER
    Date Of Registration
    Oct 2015
    Messages
    8
    Pull out the connector of the mass air flow sensor and see if it turns off again

  3. #3
    THE AVERAGE USER
    Date Of Registration
    Mar 2014
    Messages
    86
    Citazione Originally Written by manuel91 Visualizza Messaggio
    Pull out the connector of the mass air flow sensor and see if it turns off again
    Also turns off, even with the egr closed

  4. #4
    THE ACTIVE USER L'avatar di munro
    Date Of Registration
    Oct 2012
    The resort
    EARTH
    Messages
    1,207
    lack of calibration of the pressure regulator on the rail or in the ecu or the regulator gone...
    A rider does not create queues even in the car...
    a automoblista create queues even on a motorcycle...

  5. #5
    THE AVERAGE USER
    Date Of Registration
    Mar 2014
    Messages
    86
    Citazione Originally Written by munro Visualizza Messaggio
    lack of calibration of the pressure regulator on the rail or in the ecu or the regulator gone...
    The regulator is new, it works perfectly. With the regulator, the old was from fatigue that remained locked

  6. #6
    THE ACTIVE USER L'avatar di munro
    Date Of Registration
    Oct 2012
    The resort
    EARTH
    Messages
    1,207
    Citazione Originally Written by manu90 Visualizza Messaggio
    The regulator is new, it works perfectly. With the regulator, the old was from fatigue that remained locked
    the regulator again, it should be adapted in the ecu via diagnosis.
    A rider does not create queues even in the car...
    a automoblista create queues even on a motorcycle...

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Mar 2014
    Messages
    86
    Citazione Originally Written by munro Visualizza Messaggio
    the regulator again, it should be adapted in the ecu via diagnosis.
    Diagnosed with bosch, texa, and marelli doesn't make me do the adaptation

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Nov 2013
    The resort
    Mannheim , Germany
    Messages
    256
    It will also be a problem with the ecu . I the last week I had the same problem with a Ford focus 1.6 tdci. Was the software route of the Ecu.

  9. #9
    THE AVERAGE USER
    Date Of Registration
    Jun 2014
    Messages
    187
    Have you seen if you can do the adaptation of the compose new? Off beat a little bit?

  10. #10
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    708
    Hello, I say bullshit but the injector that had broken had done emery?
    If you check all the injection system of the high pressure pump and low, happened to me on the x3 and the residuals were in similar defect.

Page 1 of 3 123 LastUltima

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •