Page 3 of 3 PrimaBefore 123
Results from 21 to 24 of 24

Discussion: P0204 peugeot 206 gti

  1. #21
    THE AVERAGE USER
    Date Of Registration
    Apr 2013
    Messages
    266
    I'll try to cap that end, let's see if it improves

  2. #22
    THE AVERAGE USER
    Date Of Registration
    Apr 2013
    Messages
    266
    Important update. I have found a stranded wire, exactly the positive that goes to the injector from the error. Seems to be ruined, only the sheath, which I plugged with electrical tape. The problem now was up and down, but not gone completely. To test the continuity of the positive, and say that I do well if I'm going to look for the pin that the commands from the control unit and then move the wires looking for breaks? If not I found on the internet connector new with 15cm wire, I could giuntarlo.

  3. #23
    THE AVERAGE USER
    Date Of Registration
    Apr 2013
    Messages
    266
    I replaced the wiring and the error remains, at this point I have left the injector and the ecu. Now the oil is not present but the machine goes to three very often. I have a question, if you swap an injector then it should be recoded with the diagnosis? Because if so I have to recover the pin code.

  4. #24
    THE AVERAGE USER L'avatar di giuseppe89
    Date Of Registration
    Oct 2015
    The resort
    Naples
    Messages
    494
    The injectors of the gasoline does not have encodings invertilo and see if the error goes to that cylinder...if so, or try cleaning it or replace

Page 3 of 3 PrimaBefore 123

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •