Page 1 of 2 12 LastUltima
Results 1 to 10 of 14
  1. #1
    BEGINNER
    Date Of Registration
    Jan 2016
    Messages
    58

    Diagnosis Land Rover Freelander td4

    Hi,
    I have a problem to interpret the error code that I get in diagnosis: P1470 unknown.

    Who can help me?

    Thanks

  2. #2
    THE AVERAGE USER L'avatar di cinqueturbo
    Date Of Registration
    Sep 2012
    The resort
    The Milky Way
    Messages
    2,407
    Citazione Originally Written by canotto2000 Visualizza Messaggio
    Hi,
    I have a problem to interpret the error code that I get in diagnosis: P1470 unknown.

    Who can help me?

    Thanks
    Controls the Geometry of the turbo,The system turbocharger hoses etc
    and generally an inconsistency on the turbo pressure...
    "The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."

  3. #3
    BEGINNER
    Date Of Registration
    Jan 2016
    Messages
    58
    Thanks five, I have already changed the hoses to the turbo with those of stainless steel, changed the valve adjustment turbine...
    I know not what to check on.
    With the delphi oscilloscope I measured the various curves, but no fault...

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Apr 2013
    Messages
    266
    test with the fuel filter, even if it has nothing to do, it happened to me, when it's not him, is the valve the turbine that you have already changed.

  5. #5
    BEGINNER
    Date Of Registration
    Jan 2016
    Messages
    58
    Thanks Amen, I try to change it and I'll tell you

  6. #6
    BEGINNER
    Date Of Registration
    Jan 2016
    Messages
    58
    Nothing to do, it always comes out the code p1470 and it is as if stallasse 140 and 150km/h

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Apr 2013
    Messages
    266
    Then got a good diagnosis in real time and check how it works the turbine

  8. #8
    BEGINNER
    Date Of Registration
    Jan 2016
    Messages
    58
    Already done it Amen, everything is ok, the turbo pressure and rail are constant, when the go to the stall, it raises the graph of the rail but the turbine remains constant.

  9. #9
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    Messages
    226
    then would check the regulator and rail pressure sensor and rail pressure

  10. #10
    THE AVERAGE USER L'avatar di cinqueturbo
    Date Of Registration
    Sep 2012
    The resort
    The Milky Way
    Messages
    2,407
    Citazione Originally Written by canotto2000 Visualizza Messaggio
    Thanks five, I have already changed the hoses to the turbo with those of stainless steel, changed the valve adjustment turbine...
    I know not what to check on.
    With the delphi oscilloscope I measured the various curves, but no fault...
    Pressures reach?
    between objective and measured and you have a variation?
    "The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."

Page 1 of 2 12 LastUltima

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •