Help the map

[rego88]

expect.... do not do this to start with who knows how many things.... and not confondetegli the head.... do it start with the injectors opening times and the lim couple.... and let them know what is it, after that passed on to the pedal also xk? only with the driver that makes us'??? ? tt busted?? there are 3 torque limiters, which really? it ? only one... (with the kindred 2)

[msport (exil77grande)]

we are not starting with nothing I sol answered his question.

[mistergame]

I asked a question that is always inherent in the theme. For us beginners, it is perhaps the most easy-to-read tables that the 2d?

[msport (exil77grande)]

I asked a question that is always inherent in the theme. For us beginners, it is perhaps the most easy-to-read tables that the 2d?

let's say that it is easier to moddare in the grid than the 2d, but if we are talking about read then you have to do it in 2d.

[mistergame]

let's say that it is easier to moddare in the grid than the 2d, but if we are talking about read then you have to do it in 2d.

Then you can compare the two maps you must must do in 2d, and to know the addresses right?

[munro]

if you want to compare them to well and if the addresses are out of driver do I need to know the address, why? are marked by the sw, only the ones that are in the drivers...

[msport (exil77grande)]

Then you can compare the two maps you must must do in 2d, and to know the addresses right?

if you want to compare ori and mod with regard to the addresses you from the driver, you can make it in a table but if you want to do it in a complete,professional and see exactly all the difference between the two files, even in the areas not listed in the driver, you have to do it in 2d.

[mistergame]

but there is a sort of manual where you can better understand the graph in 2d because' so' and' very difficult. For example, I read a sort of manual of ecm2001. It seems very well done to map mode in the table. But as far as the 2d there is nothing around. Why not post a generic chart in 2d and explain step by step the various sectors?

[mistergame]

for example, I would like to start to compare my file ori with the mod files, but for me it is very difficult in 2d I am looking for a hand-step-by-step. For now, as the program I have only ecm2001.

[mistergame]

if you are up to it give me a small aiutini to begin to compare the two files. Then I have my ori (finally), and I have the mod file. You (msport) you told me that on the ecm 2001 there is a driver that is very close to my and the 449. Then starting from the beginning, I have to load the driver first and then the two files (ori and mod). At that point I go on the 2d, and I should veedere the differences between the two graphs overlap. Up to here we doremmo be.