Help me please...
The map ECM titanium is the " start-up torque"?
If OK how to proceed with the increases?
Thanks
Help me please...
The map ECM titanium is the " start-up torque"?
If OK how to proceed with the increases?
Thanks
If I were you, and you say na novice that I am, I would start with:
opening the file ORI and the comparison with the MOD
See all the gains that you have loaded, and fire regimes, the maximum that you can adopt in the relationship with the maps.
The fact of this, you can increase something and try the difference.
Watch I today I uploaded my first map made with ecm titanium on edc16, and I tell you that I made 5 revisions of the file before loading it with about a week of testing only on the pc without loading anything.
By comparing with various templates that you find online arrivals to do something decent and a little risky.
With respect to the sensor of turns just consult the poccolo but useful maintenance manual (use as a "guide for the intergalactic hitchhiker's").
Good luck!
Live ****** & you Die a HERO !
Before I touch the map, I would make a diagnosis as I have already recommended you to annotarti any errors in the memory that can indicate any components to be replaced. Because even if that were so, edit the map would be useless.Originally Written by maxgen
For tranky:
The map mod has been done already...
I only have the problem of cold starting and I would like to know if making changes with ECM titanium resolves the problem and I read somewhere that you have to adjust on the ECM "couple during the start-up" but I do not know how to intervene, if in percentage, and in that range..
For errecinque:
Errors in diagnosis are not
Trivial question but sometimes......The glow plugs did you check?
Sure that the DTC is active? If I'm not mistaken if the dpf has been deleted with time the dtc you lose them all....try to unplug some plug and to make the diagnosis
The spark plugs I measured with a multimeter and they seem to work all.
Regarding the Dpf, I was taken out by an expert but honestly I don't know if you deleted the dtc.What I can say is that errors,when present,are reported!
PS.I read on a forum of the 159 that a guy had the same problem cold starting but that has been resolved only partially by changing pretty much everything...the glow plugs,sensor,sensor phase,put non-return valves to the diesel oil circuit, etc, etc then I'm not going to spend a lot of money in order to resolve the 70%..this is because at this point I would like to intervene from the map..at least I don't throw away pennies ;-)
However, even if it was a palliative,no one yet has told me if it is actually the map "couple during the start-up" ECM titanium would help to improve the cold starting. I ask, eventually, how to proceed with the increases.
Thanks
IMG_20151215_084131.jpg
Okay so as a percentage?
I hope someone notify me if this okay or not...
To tell you the truth, many of these cars have had problems in the cold..turning on the various forums is deduced.
In any case, and regardless no one still managed to give me a simple answer on the map....
Write permission
Quote