hello guys I'm making this work I ask you if I'm heading in the right direction I attach a file ori already cut and mod file with egr off and dpf off for the moment if ok, proceed with the mapping!!!!
hello guys I'm making this work I ask you if I'm heading in the right direction I attach a file ori already cut and mod file with egr off and dpf off for the moment if ok, proceed with the mapping!!!!
Seems Ok.. Proceed with the reset with the diagnosis and then go with the writing..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
hello cinqueturbo, what should I clear before writing?
however before writing, I also have to map the network drive and I would like to be a moment later on if I'm doing it in the right way if this mod is ok, proceed with the mapping and the place to check, thanks
It means, I think of clear errors in diagnosis, and do (l) procedures to reset parameters on the dpf. (Replacement clogging, etc.)Originally Written by project
Exactly what I meant..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
ok, perfect-thanks!
I gave a look at the map with with titanium, I could confirm if these addresses are correct?
08DE86 press turbo
08DBE6 map is not identified
081714 lim. IQ
0817EC maf
0819C0-081D60-0833DE I seem to be limiters but not well-understood what
then from the driver to the ecm l the injection split it seems to me, an injection time
l injection split(map1), it seems to me the limitatorre fumes
then, the torque limiter#3 are the classic torque limiter, while the other two I have not understood
what am I doing wrong?
can someone help me with these addresses?
I do not have the damos for this map, and winols does not give me even the possible maps I need some help!
Get these Files to begin to understand something more..
MJD6F3HW04P
Num SW: 3548B596
Dis FIAT: 51862580
MJD6F3HW03P
Num SW: 3144P754
Dis FIAT: 51796241
In your file maps essential are these...
0805EA
084B46
085F2C
089744
08AC68
08E662
08E682
08F217
08F480
08F4D7
09040C
09053C
090672
090C36
090D76
091066
09109C
0910DE
091130
0912B6
0912E6
091B3A
091CB6
091CFE
0920D1
092212
092975
092B08
092C23
092D63
someone has time the from one eye and the by the wording..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
ok the files I have found are a G Point and a 500 all and two 75hp giuto?
because you tell me to look at these two files? I do not have the damos then I'd still be at zero or am I wrong?
however, as soon as I can them I get the two of them.
But the damos for this ecu, is there?
anyway thanks a lot for your help!
if someone in the meantime, I can give you the names of the map I would be very grateful!
Good evening guys, then I studied a map, and the maps indicated by cinqueturbo, those map I have been of much help because I do not have the damos, and then I should spulciarle as for the map of Y then are passed directly to that.
I found some address if someone could give me a hand kindly and give it a look thanks.
-0805FC map unknown
-085F3C unknown
-085FCC it seems to me the map lim rail
-08608C map rail
-089766 unknown
-08ABFC Limiter fumes
-08E664 Lim. couple #3 (nomenclature ECM) I have not understood what the map is
-08E684 Lim. couple #3 (nomenclature ECM) I have not understood what the map is
-08F218 unknown
-08F4D8 unknown
-09040E lim. torque (nomenclature ECM)I have not understood what the map is
-09053E lim. torque (nomenclature ECM)I have not understood what the map is
-090672 lim. pair 2# (nomenclature ECM) not l I understood that either
-090c36 unknown
-090d76 unknown
-091130 it seems to me another limiter rail
-091b3a unknown
-092976 unknown
-092c24 unknown
-092d64 unknown
thanks a lot!
Quote
