ecus edc15c2 death

[penelope888]

hi some time ago I removed egr and fap from my peugeot 307 hdi and as I have had problems with the am29f400, I decided to put the socket in case I needed to flash to the new chip . Quanche month ago I found a ecu with the same hardware and I decided to clone it by reading from my both the st95p08 that flash my file orifinale 29f400 . this morning I swapped and the car started normally, when I turned it off but it's not the most broken, all I get is the symbol, and esp do not hear the fuel pump part. the problem is that it does the same thing with both ecus .
who can give me a hand, thanks.

[giuseppe89]

What model are we talking about? 2.0 hdi? horses?year?

[penelope888]

hi some time ago I removed egr and fap from my peugeot 307 hdi and as I have had problems with the am29f400, I decided to put the socket in case I needed to flash to the new chip . Quanche month ago I found a ecu with the same hardware and I decided to clone it by reading from my both the st95p08 that flash my file orifinale 29f400 . this morning I swapped and the car started normally, when I turned it off but it's not the most broken, all I get is the symbol, and esp do not hear the fuel pump part. the problem is that it does the same thing with both ecus .
who can give me a hand, thanks.

now with my edc15c2, the car part but with the cloned sometimes part if I turn off I have to wait some time before restart .

[penelope888]

year 2003 110 hp

[tezzero]

are you sure that only depends on the ecu? when it is running is t
all regular ?

[munro]

you have a problem with the bsi..I think it is corrupted..beautiful mange..
forgive the ecu ori and if you have the lexia try to redo the alignment proxi ecu and bsi...
but maybe that is saying a bunch of crap and then try to feel someone else..

[sportknight]

if you occasionally go in every so no check for good welds

[penelope888]

then will update on the situation
I flashed again the clone is 29f400 that st95p08.
done various tests on and off from a stop everything is ok
I do some miles (the car is so perfect) get back in the garage I turn off and I try to turn on but not part of light esp on.
refit original unit all ok
who I can explain what the hell happens

[carlo abarth]

but diagnosis do you have any problem on the can line???

[todos]

Hello to all,penelope, I had a similar problem on the 407, which has the same ecu, the fixed by clicking the solder on the terminal board of the control unit the defect was not presented to you more, I hope I was helpful............