DPF removal EGR on the Alfa 159 2.4 JTDM

[ultimo000]

Remap done.
Ecuscan tells me the filter is not clogged, and clogging up to 1000.
Everything should be ok.
Tomorrow I put the tube....will update on how it goes
Thanks

[Errecinque]

If euro 4 yes, the same discourse. The addresses may be different, but just comparing the areas in 2d the individuals easily

[zxrrr]

Thanks Errecinque! My first step will be to power off the electronic EGR since it is already broken, locked in closing, I cleaned but nothing has changed....then I will make the DPF

[Errecinque]

Thanks Errecinque! My first step will be to power off the electronic EGR since it is already broken, locked in closing, I cleaned but nothing has changed....then I will make the DPF

I think that if it has failed electrically you must also delete the dtc that you leave in a diagnosis after having disabled the usual procedure of panettone

[zxrrr]

I think that if it has failed electrically you must also delete the dtc that you leave in a diagnosis after having disabled the usual procedure of panettone

ok thanks for the tips....I...the operation I'm going to do with galletto1260 as an interface and a time ( my friend's) to process the file ori, I have read in the forum to work quietly on my ecu. As you may have understood, I am very beginner.

[cerbino]

I have personally used the Time on an Alfa 159 1.9 16v jtdm with dpf and I have deleted the egr and fap. The result is ok but I recommend you should always, before writing the file, open the map ori and mod it with software (ECM for example) and re-save the map mod to have a checksum is already correct!

[zxrrr]

I have personally used the Time on an Alfa 159 1.9 16v jtdm with dpf and I have deleted the egr and fap. The result is ok but I recommend you should always, before writing the file, open the map ori and mod it with software (ECM for example) and re-save the map mod to have a checksum is already correct!

Thanks for the advice

[Errecinque]

ok thanks for the tips....I...the operation I'm going to do with galletto1260 as an interface and a time ( my friend's) to process the file ori, I have read in the forum to work quietly on my ecu. As you may have understood, I am very beginner.

Let it be a time...get the map above to whom I have given the addresses over bit for the switch and look for them on your map. Put them in the values and the time is not needed

[zxrrr]

Let it be a time...get the map above to whom I have given the addresses over bit for the switch and look for them on your map. Put them in the values and the time is not needed

Perfect Errecinque, week next beginning, in the meantime, read the map ori, unfortunately I still can not download the file, surely you will ask more tips. Thank you

[Errecinque]

Perfect Errecinque, week next beginning, in the meantime, read the map ori, unfortunately I still can not download the file, surely you will ask more tips. Thank you

Read it, and put it that you say the right addresses.