MARELLI MJET impariamola!

[Errecinque]

Then give me a bit of a straight. Now they are to the cell as soon as I can I'll post the map. Now that finished the season I can get rid a few minutes of time I can do a bit of testing. Today, I brought GOLD everything that I had increased to try to climb with the bar of the rail, but surprise, the flashing of the light in the moment of maximum torque is not gone.according to you which map I moddato improperly or as a limiter that I'm missing to get rid of the problem? Remember that it is of the first stroke 70 hp 2003. And, a part from this the car goes very well. Thanks

[Danny]

With how much bar rail you blinks? Error code?

[Andrea1]

@ danny it would be handy to know how many bars you have increased and their errors... a log would be ideal to understand (usually I do)
in addition to the map of the rail pressure have also increased the respective limiter?

[Errecinque]

This is really the point. I was sure it was the fault of the map rail increased with their respective limiters, and bits (at least the ones that I know of) the culprit of the flashing and also reporting all changes concerning the price of the rail to the original values flashes the same. Now I turn on the PC and I'll post the map. Thanks!

[Errecinque]

Here it is ! I attach ori , the previous map with rail mod and the map currently loaded with rail gold that flashes equally
if you notice some deficiency to be correct I'll be very grateful. thanks to all


Race 70cv x forum.rar

[Andrea1]

I do not have sufficient messages to download... anyway I have a lot of experience on the race 70cv, I have a bit more on the 90hp. In the ecu, you will not remain errors? with a diagnosis, I think we can get more quickly to the solution in these so the elm does wonders
do you remember how many bar did you set the rail in the new map?

[Errecinque]

RACE 1 27122014 RAISED other lim rail REBUILT 2 TRY 3 BIT 775.rar

Sorry....... I also tried this with other mods but nothing flashing, was always present

[Errecinque]

I do not have sufficient messages to download... anyway I have a lot of experience on the race 70cv, I have a bit more on the 90hp. In the ecu, you will not remain errors? with a diagnosis, I think we can get more quickly to the solution in these so the elm does wonders
do you remember how many bar did you set the rail in the new map?

Speech diagnosis: as soon as I get back from my friend I plug it in and verify it, and rightly, if by some mistake (but I doubt it since it does not remain switched on the light, and what is linked
the bar I tried to set it to 1500, then down to see if smatteva to cut but I repeat also with the values of the rail original the do the same, for that I ask for a verification of the map if someone can tell me where can be the error evidently is not related to the only rail

[Andrea1]

I would try to load the original map and not the one before the last edit.. but I don't understand why the light blinks only when you ask for the maximum of the pair and remains on.. mah!

[Exelion1986]

same problem here... here we are again
the parity changes a point in the second series, the restyling has not given me problems in 1470 bar (1400 gold +5%)
on the race instead, that value blinks, a bit of time I set to 1450 bar and no problem
I do not think that they remain errors in diagnosis, it seems to be some limiter because the files of the two cars are not perfectly equal in all areas