Hi guys I need to move the immo from an ecu burned a eurotech cursor on a scrap dealer you tell me if the e2p and always a 24c16 as on the ms6.3 seen that this should be a ms6.2 thanks in advance
Hi guys I need to move the immo from an ecu burned a eurotech cursor on a scrap dealer you tell me if the e2p and always a 24c16 as on the ms6.3 seen that this should be a ms6.2 thanks in advance
eye on the number bosch must be the same for the cloning
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
But the e2p and that?
you ? that the 24c16Originally Written by nox
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
Ok thanks for the info ! The number bosh still I don't know if it is equal to the ecu me the door to the customer
usually starts normally without changing anything... despite being from different means, just mount it to the new ecu.
considering that this is a very fair response
considering that this is a very fair response
Quote
