-
peugeot
I have a peugoet 206 2002 2.0 engine ,
when you put in the bike is fine after a few walk speed up to 1000 rpm, then you stop the shut down, restart and after that it goes the penis party walk for a while and it accelerates detachment of the air mass meter the car goes very well
the alternator works a wonder I changed the engine control unit but nothing to do always the same defect
-
-
sure that the unit that you put is good?
-
I don't know if it is good I have taken in a demoman, and I found that it was already changed the ecu for different reasons
I'm thinking it may be in the type of map ? or some parameter that makes him do this a defect?
-
This problem have me in the smart roadster. Changed the throttle body and the machine runs perfectly. It was broken
-
The diagnosis gives you something?
-
it's not giving me anything in diagnosis
-
I have changed as well in the flow meter but nothing to do ,I opened the engine plant and the insulated wire to wire with tape but nothing
-
sensor absolute pressure and thermostat are good?
-
with the engine off, the pressure sensor 1 bar ,when I put in the bike and push the pressure rises to normal
the temperature of the engine is stable, I no longer do
Tags for This Discussion
Write permission
- You you can not post new threads
- You you can not send answers
- You you can not send attachments
- You you can not edit your posts
-
The rules of the Forum