The amount of diesel and smoke

[joker01]

Guys, also if a pp old beautiful post....
So here is my question,I am working on my alfa 156 jtd edc15c7
I have adjusted the map fumes with max iq 82mm3,driwer wish max 85mm3
Doing a log I find as iq in mg/i values of 75/80 mg...
sorry but the map smoke would not be a limiter of iq???


..

[lupak]

Then, on the edc15 the value of iq is considered to be in mm3
Regarding your question, the limiter you are fumes to is a limiter of iq.
You'll have 82 mm3 at the maximum if the sensor quantity of air sucked in will read a worth that to have 82 mm3.
Whereas, there are other limiters .

[joker01]

ok but in the log I as the values of 80mg are more than 82mm3.....*****and is it possible???

[frenk85]

mail the "ends of the map,"I can give you a hand if you want........

[joker01]

I opened a post in this section beginners..."opinion map 156 110cv"
however, I in the map fumes I as the value of the last breakpoint 82mm3 throughout the column......if it is the only limiter, diesel or diagnosis with multiecuscan is not truthful or do not know.....

[frenk85]

I'm a beginner,can I not display,I need it hw,sw

[joker01]

edc15c7-ALFA 156 1.9 JTD 110 HP 0281010335_1037351517 this is the original that is ecm titanium

[frenk85]

edc15c7-ALFA 156 1.9 JTD 110 HP 0281010335_1037351517 this is the original that is ecm titanium

you'll spot the limiters to "unlock" the machine:073232 075502 0757c0 076796 077558 0775f4 077ea6 07811c 078198 07822c check them out well I gave it a quick look.......then of course there are all the different maps, the management have already changed.
the last thing a council close the egr to the indirizzo071e80 and map mass air flow sensor 072236

[joker01]

you can when you have time, tell me what are these limiters???
the erg, I've already closed the map, mass air flow sensor on the basis of what should be change???
however, I did another log at idle rpm(850 rpm and 450mg air) and I like the iq 4mg/i; if I go in my map smokes I take the column of the 350mm3(would be 452mg I did 350*weight spec.air) at 800 rpm I as the value 25mm3 that if I mg become 21,25....
is there something that I did not go back......

[joker01]

I have discovered...
Injected it in myself more diesel than that calculated map smoke because in the torque limiter of the values I had calculated in mm3 instead are mg....