Diagnosis Peugeot via elm327

[Lucif3ro]

Hi guys, as the title suggests I would like to understand how do I run a diagnosis on a vehicle peugeot.
I have a elm327 bt made in china, I worked well with my lancia lybra, but on a peugeot 206 is not able to communicate with the ecu.
It is a software problem or hardware (or both)?
I read somewhere that the cars peugeot have a different protocol, and in this regard I would ask another question, but before finish unintentionally off topic I look forward to a response from someone who has had this catch like me.
I hope to receive good news
Soon,
Lucif3ro.

[alfetta80]

that form 206'?petrol or diesel?year?
I don't know elm327 but you should try with another diagnosis and see if it communicates...

[Lucif3ro]

hello alfetta! ? a 206 sw 1.4 diesel 2003. I've tried several sw of diagnosis, as well as the torque on android. but nothing

[pinotec]

already talked also about the other post...
you have to use the sw scanm*ster and set the protocol and speed manually on the program.

[Lucif3ro]

good morning pinotec, speed? the elm327 1.4 b BT (clone) is set by the device manager, or by any label software? and at what speed? we set?

[pinotec]

from the label of the soft ,you should set the speed to 9600 and set the protocol in the manual.. if I remember well... as kwp...
I had the same problem on a 406hdi 110cv

[Lucif3ro]

ooook! as soon as we could? effettuer? the test. thanks to all for the advice