Good evening to all, first of all congratulations for the discussion, very interesting, first of all, simon, the one change that you find in 2d that thou hast done ? simply the correction of the checksum, then the rest according to me you should put a limit on the max torque that you want to have and consequently change the rest.
Hello Jared, and thank you for being involved in the discussion.
I didn't know the changes made by the Ecm, opened in the correction of the checksum, I had to get there. Thanks!!!
In fact, to put a goal on the max amount? of diesel to be delivered I find this very important; both in regard to the condition in which ? the mechanics of the car, and its use.
Then by l? you part to fix the rest. Sure it takes time and many trials.
And with those tests, touching one thing at a time to see the behavior of the engine and its response buying experience.
Then c'? to understand where and how to edit the maps, I st? studying the damos to find all the maps you need
In the network there are several discussions, with some suggestions on what to change.
I still have the chance? to see the attachments, and sometimes even in front of the right address in the map, doesn't it ? cos? easy to understand what and how much to change.
But the lion's share, as written above, after the theory are the small tests with a diagnosis in hand.
What model of car do you own?
159 150 hp �
Okkk......
Hi Simon I wanted to ask you, since I cannot see the file, if you made changes to the map of the injection times that that has on one axis the pressure and on the other the amount? of diesel oil you want to inject. I do not know the EDC16c39 (I'm searching a little bit now), but on c8 the maximum injectable ? 80mm3 (why? the times you stop them and to go further we need to rescale and calculate everything) and I was wondering if also on the c39 to the limit stops 80 or ? pi? high.
I also like this method, or "draw the torque curve" and then change the rest in the function of thisOriginally Written by jared_poe
*simone, sorry you do this question, as you have set the maximum pressure of the turbo?
Hello.
2550 hPa.
Write permission
Quote
