Kessv2 original is not recognized

[ugoboss]

Guys maybe I have not explained
I have done just that
I didn't do any write operation or a read to bank n? from the obd.
I know as well as they are made to the units....
I know that you think that I was l? with two screwdrivers to stortare the control unit.
No.
Unfortunately, I do not know and I understand.
For? I can assure you that I opened it with all possible precautions, and of the utmost delicacy.
? this is what I can not explain.
If I had jack we could figure it out....
Of the trade I do another thing
Work already? with products that use microelectronics.
What I been telling you not ? compatible with the one that to me ? success.

gianni I think no one doubt what you say, but unfortunately, the reality says that the unit is very likely ? blown ? success is equal to a colleague of mine, opening edc16c39 alpha reassembled, and the machine should not be better to error on the injectors, he know that ? managed to repair it, by a technician, you wait to hear what you'll say in opel, and then try to read it in the bdm to clone an alltra used.

[gianni1001]

I enclose a photo of the offending component on the line of the component with the adhesive 228 and the fourth on the right.
The breakage or short circuit would have created the fault seen in the diagnosis.
The component is located in the bottom of the board and the cio? the hidden side.
If anyone knows of a technician that repairs can verify there? they told me I would be very happy to understand how it was possible.

[rodcraft86]

it does not seem a c9 that ecu

[msport (exil77grande)]

gianni I deleted the double post and I accidentally deleted the photo attached in case the re,for the fact that you and the success you wonder why maybe you have used all possible delicacy, but I don't wonder for nothing because it's happened to you,happened to me and it's happened to most people better than us so quiet, take it with philosophy.

[gianni1001]

But certainly Msport
All in all ? a business risk that there is '.
It was just to understand what kind of error I did not possibly repeat it.
X the photo ? the same
Thanks to all the info x

[gianni1001]

Then...
As I'm a blockhead, and I'm not giving up...
Found the fault
I discovered that the component is burned, which I posted the photo, it was a mosfet, this ? his code with which you will find: HUFA76419D3S.
And in that the control unit seems that happens to x the fault of the injector..... Of course, replaced....

[rodcraft86]

very interesting, congratulations for the scrupolosit?, the reason of the burning what will

[ugoboss]

then you fixed it, very good!

[gianni1001]

.............................kess sostiuito warranty.....................................