Map BMW 320D e90 163cv EDC16C35 754_967

[alxcrs]

Then.... I just made a version from scratch with the closing of the EGR via the panettone and the DPF off with the directions of the Exelion...
I hope I can give news as soon as possible!

[Exelion1986]

then I found a damos
I have translated from the German with ****** translate so I might not be very accurate
however, the single-bit serves to block the activation and measurement of regeneration, or something like that
the other group of bits for now I can't find it why? the damos ? referring to a file without dpf, perhaps in the area ? very different
however, even when he touched them, then they could be right
if I can find something more? you update

[Exelion1986]

ok found the other area
it was much more? short then I don't know the other bits what's the use, for? also that area ? relative to the regenerations
probably time smoothes out all of the functions when just a few bits to turn them off
or someone more? expert confirmation, or the only one ? try

[alxcrs]

Definitely those three bits will be the DTC, and the lambda... however, I believe that the only one trying!
Also in my case it is the machine of a friend, but at this time it is from the body shop so I can not test it, I hope as soon as possible.

[Exelion1986]

the problem ? I have looked at various damos but they all differ from your file in that area
when you do the test, let me know if it works

[alxcrs]

Ok I'll' know...

[maps77]

hello, perhaps you have already solved, but I can confirm that the curves for the exclusion of egr are those hello!!!

[.Antonio.]

Also of interest to me to see what the curves for the egr on this car.
Unfortunately I can not download.

[maps77]

therefore, the egr off next to the cakes, you'll notice two curves low that are to be brought to zero around at the address 0C9...
if someone inceve kindly send me pm for the bits of the dpf, I'd be grateful

[.Antonio.]

therefore, the egr off next to the cakes, you'll notice two curves low that are to be brought to zero around at the address 0C9...
if someone inceve kindly send me pm for the bits of the dpf, I'd be grateful

Ah, in practice, I have to reset the curves adjacent to the panettone?
I do like the egr Fiat after the panettoni of the c-series'? an area reset?