sure, those numbers make a big difference or 0475 ? referring to the v53 0386 to the v54 but between the two already? the v53 ? best.
sure, those numbers make a big difference or 0475 ? referring to the v53 0386 to the v54 but between the two already? the v53 ? best.
here are the photos of my cock v54 open
the rest of the photos... I hope they are clear
There are several components to replace, some are good but the ls14 must be replaced, the 2 relais large yellow, the quartz, for the rest I can not read it in detail and the same thing for the capacitors........since c? the components list check it out under the lens from the lab, but to say immediately that v? up-to-date including the chip nxp you have the sw 0386.......
software 0386.... but let me understand one thing,it costs to replace these parts? and because you have to replace?Originally Written by passion engines
only the leaders of the non-operation of the bdm?
if you have the ability? and the equipment does not cost much, but if you have to pay a technician you need to add his work, the first thing you need to have a tool best and then figure out if something wrong in the procedure of reading in the bdm. Often part in proceedings without having a p? do notions. I strongly you recommend you do upgrade the hw, and then you will see?....
but was wondering if it was mandatory to run the bdm... the procedure of reading I think is correct
flat cable always with the red side to the right, use the 10 pitches all right with the e xxx bosch
the food, the wing nut with the supplied power supply or even with a stabilized,but nothing changes...
you run this job on the cock? send me a private mess,which to me does not send them
from the photo it seems to me that the links are correct
then if you also have already? controlled to arrive at the right tension at the e xxx I know that you don't have to do that to intervene on the hardware
If you want it to work in bdm you need to upgrade the hw, if you want to work from serial with risk also ? always a your scelta.........For the rest, ask for info to adimn and staff if they are advised to run there? you need....
but damn... I'm at the point I should take a bdm 100 and I sleep peacefully?
which admin? you can't make this work? of course, for a fee,free of charge, not doing anything....
in addition, an interface bdm that there are no problems , a bdm 100, would be better? as for the serial use mpps v13 and I'm fine...the cock I had taken mainly for the bdm,but if it doesn't work,the rivendo and I'll take a bdm 100, and I am peaceful
Quote
