Hi guys,
I have an alfa 159 1.9 16v 150 hp with a mappetta with which I find it quite good.(EGR and DPF off with a straight pipe installed and a few horse on the pi?)
The problem ? now if you thrust with the throttle and the clutch at the p? slide approximately between 2200 and 3000 rpm .
The machine has about 170000 miles and I took it with 150000 so I don't know if the clutch ? was gi? rebuilt...problems at the flywheel, it seems there are none why? it vibrates and when I turn off and turn on the machine I do not feel shaking...
I'm attaching the map ori, and that mod..the couple did not ? high, according to me, but...what to do?
lowering of the torque in that range almost to bring them to their original values, or there are mistakes on the map that cause more slippage of the clutch?
you therefore need to adjust some other parameters in addition to the torque limiter is to reduce slippage?
I accept suggestions .
thanks
ps.the changes to the map to do with ecm2001..I know it's not ? the maximum but are not expert in absolutely on the contrary!The map I've made of course, but one that makes the map a long time but sometimes there? it doesn't mean anything, and often the maps of others are regardless criticized, then I'm not interested in that someone to make me a map **** to walk but at least I can suggest to fix the gross errors present in this map
Quote
