Thanks cinqueturbo you've been very kind, I can just load the file and see if it starts, terr? up-to-date....what about the map I don't want to overdo it because? ? the first marelli that I do and I want to learn how to respond to the practical act, but at least tell me, I caught all the limiters right or something is still missing a part of the bits of the turbo that are already? to 1500 and the pressure for now, let ori.Originally Written by cinqueturbo
I'm sorry, but then that map with the tips to 199 that I have ori not ? a limiter prex rail??
But the machine and shared?
And a change that I don't know...
Starting from the fact that the map rail not lai even touched
They request that limiter.. Then there are still maps to retouch.
Lim on the basis of the rpm, lim, running, and other lim torque etc etc.
Not better that you trust in the service file on-line for the map made it to the doc?
And take your cue from the map working...
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
But as the map rail I have not even touched....??? I put the map to the 1600 grid to get 1500 real (the file ori was 1400) and raised in 1510 the 2 maps limiters (which one ? the one that you put golds you in the last file) before and after the map pi? the 2 bits from 775 to 805 as I have studied in these weeks on this ecu. also the torque limiters ne
But as the map rail I have not even touched....??? I put the map to the 1600 grid to get 1500 real (the file ori was 1400) and raised in 1510 the 2 maps limiters (which one ? the one that you put golds you in the last file) before and after the map pi? the 2 bits from 775 to 805 as I have studied in these weeks on this ecu. also the torque limiters I have changed the other 3 in the bottom of the file as the various guides. are here
Lim Pressure Rail.jpg
Lim Pressure Rail 2.jpg
Rail Pressure 1.jpg
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
I forgot to 069E3C-069FAE There are a whole series of lim
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
I don't understand......that file you're comparing? To these addresses the I mod limiters at the last ladder. And from the screen above seems to be a different file from my bed loading a driver on the pi? complete that type of point. However, seeing the form, even the ones I get up to 1510. All this compared to the golds that I've cut you. The mod already? existing I didn't want to consider but ? the only file with that part of the machine...(I don't have even without the map, and the bit that I had removed)
The reason perfectly convinced,
convinced that yours was 75hp..
Then do not o er the rest of your message...
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
No problem happens..... it means that something we chiappo :-) .
I immediately noticed a thing, but I thought it was normal instead I think the problem is the ECM because when I load the file that is read by the car and compare it with the ori if I do some changes and saved him, then I find a handful of different bit without having them touched, immediately before the area of the maps, real.
Write permission
Quote
