I try file Ori of this ecu FGP (photo) opel corsa 1.3 mj 2003

[cinqueturbo]

But according to you, can give me problems in writing in the serial?? Someone has a gold bed with mpps??? Thanks

To be cut.. Email the files that Tello settle...

[Errecinque]

To be cut.. Email the files that Tello settle...

Thanks cinqueturbo. I attach here the ori why? not ? my but I think it is correct, and the file that is read by the car that was already? state moddato previously (among other things, if you give me an opinion as the marelli does not know, and I'm studying now, I would be grateful).

TRAVEL 1.3 01246JO01D 55196353 1413X586.rar

[Mikigor]

to you the file

[Errecinque]

to you the file

Thanks to you Mikigor....certain that to understand 452,448, your ? from 449.....but in writing I have to flash a file of the same size as the one read by the ecu right? Then from 448 0x70000. If I put a different size the car should not be more? I think.

[Errecinque]

I'm sorry, but then that map with the tips to 199 that I have ori not ? a limiter prex rail??

[cinqueturbo]

But the machine and shared?
And a change that I don't know...
Starting from the fact that the map rail not lai even touched
They request that limiter.. Then there are still maps to retouch.
Lim on the basis of the rpm, lim, running, and other lim torque etc etc.
Not better that you trust in the service file on-line for the map made it to the doc?
And take your cue from the map working...

[Errecinque]

But the machine and shared?
And a change that I don't know...
Starting from the fact that the map rail not lai even touched
They request that limiter.. Then there are still maps to retouch.
Lim on the basis of the rpm, lim, running, and other lim torque etc etc.
Not better that you trust in the service file on-line for the map made it to the doc?
And take your cue from the map working...

But as the map rail I have not even touched....??? I put the map to the 1600 grid to get 1500 real (the file ori was 1400) and raised in 1510 the 2 maps limiters (which one ? the one that you put golds you in the last file) before and after the map pi? the 2 bits from 775 to 805 as I have studied in these weeks on this ecu. also the torque limiters ne

[Errecinque]

But the machine and shared?
And a change that I don't know...
Starting from the fact that the map rail not lai even touched
They request that limiter.. Then there are still maps to retouch.
Lim on the basis of the rpm, lim, running, and other lim torque etc etc.
Not better that you trust in the service file on-line for the map made it to the doc?
And take your cue from the map working...

But as the map rail I have not even touched....??? I put the map to the 1600 grid to get 1500 real (the file ori was 1400) and raised in 1510 the 2 maps limiters (which one ? the one that you put golds you in the last file) before and after the map pi? the 2 bits from 775 to 805 as I have studied in these weeks on this ecu. also the torque limiters I have changed the other 3 in the bottom of the file as the various guides. are here

[cinqueturbo]

But as the map rail I have not even touched....??? I put the map to the 1600 grid to get 1500 real (the file ori was 1400) and raised in 1510 the 2 maps limiters (which one ? the one that you put golds you in the last file) before and after the map pi? the 2 bits from 775 to 805 as I have studied in these weeks on this ecu. also the torque limiters I have changed the other 3 in the bottom of the file as the various guides. are here

Lim Pressure Rail.jpg
Lim Pressure Rail 2.jpg
Rail Pressure 1.jpg

[cinqueturbo]

Lim Pressure Rail.jpg
Lim Pressure Rail 2.jpg
Rail Pressure 1.jpg

I forgot to 069E3C-069FAE There are a whole series of lim