Hi guys I have this problem I have to read this ecu of a gp 75hp but I can not communicate with the interface.
I have to say that I followed to the letter the instructions of the link and removed the resistor to get it to communicate, but nothing.
I attach images error
I can not see the images, why? are still limited, but you're feeding correctly from the comb?what uses the strip, or have you tried e xxx?
strange thing, not even ID, ? the first mjtd 1.3 what do you do? I want to say your tool ? tried on these ecu's?
why? if the tool ? ok the problem must be related to the links.
have you tried to reconnect the ecu in the car?
but you are selecting BDM Jdag you?Originally Written by obd75
it seems to me that you are on the page car..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
I powered everything according to the instructions in the pdf and I used e xxx spring on the template.
I just says micro nn supported.
I selected bdm jtag.
The screen was to see in the info what he said to the micro
Mpc58
But bdm me mpc55x mpc56x
Sorry polini the message and turned to you..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
E-mail of the fodo and The ECU under the template to the wall of schedule and pinout..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
but the big point is it not ? only 90 horses? I think in the menu you should select the point and not the point
C'? the 75 and 90.
My ? 75
Write permission
Quote
