Hello to all. Today I read a Suzuki Splash 1.3 DDIS 16V 75hp, with galletto V53.
The file ori resulting ? this: http://www.professionalchiptuning.ne...ll=1#post89308
Possible that it is only 448 Kb and Titanium, I don't recognize?
I ? rise to the suspicion that this is only a partial reading. If it's so? had to do a full read, I am forced to read it in the bdm?
Matthew
sorry, I have a problem, I read a Suzuki wagon 1300 mjet marelli control unit with the mag pro 4.2 using incorrectly the protocol for opel agila. I changed the flash and tried to rewrite it without success with msg signal control unit absent contact magpro etc. etc. now but remains on the light engine. I did the diagnosis and viaso ene out the wrong ecu programming, the machine, however, turns on and ? everything is in place. To turn the light off I tried to rewrite the original 448 kb with the exact protocol of the Suzuki wagon but the golds that I had been read with the protocol agila, but in any case I do not write. suggestions?
Open a new post, don't you see that the car and the ecu in question are different?Originally Written by radd7
Not ? having said that, every time you enter a file ori titanium you can recognize.
However, pi? later I'll give you a look at the file. I have made several of these I remember that in reading the instrument takes about an hour.the your as much as you have used?
in fact, I wanted to open a post or another discussion. how to do it?
http://www.professionalchiptuning.ne...ianti-vf9.html and the beginning , then in the annex to put the file that you have read and if possible also an ecu id and begin to understand that car speak.............
the 70 hp have file 448 kb, 75 it seems strange to me
easy to have made confusion with the protocols of the Suzuki Splash ? only 75hp with or without dpf
I don't remember how long it took to read it, but less than an hour, it seems to me around 20 minutes.
Before reading I have done the ecu id and if I remember correctly, the rooster has changed in the automatic protocol... May be that is qu? the problem? I try to read it without the ecu id?
Matthew
Hello, for the Driver, double-check what you're doing with the tool, automatically, so you don't change anything on the cock, then the other thing Suzuki Splash and Opel Agila from 2008 onwards are identical, produced both by Suzuki with small differences of accessories and exterior finishes, mechanical and electronics are identical.........
Write permission
Quote