What enters the torque starter with the flywheel? ?
What enters the torque starter with the flywheel? ?
The power is nothing without control
Hello, I've seen the map, doesn't it ? bad but according to me low ? too the original. You want to send me your **** that I can not write you in private?
The power is nothing without control
Perfect is the evening as soon as I'm home I'll send you a ****.Originally Written by jovandj
I thank you again too kind
The power is nothing without control
Jack if you're taking a shot. ...
The power is nothing without control
with the durations angle, you just need to convert the time durations corner and you know what it takes for an injection angularly speaking, subtract the advance and know how to inject before TDC and after TDC
The power is nothing without control
How do I convert the time durations angle? Doing that calculation? Can you give a practical example? Thanks!
Look, if you read carefully in the forum and been told hundreds of times...anyway, in a nutshell, take the rpm and multiply it for 0.000006 example 4000?0,000006=0,024 and then take the life in us that you need as 80 mm3 with rail ori inject them in 968 and multiply to 0,024 = 23,23 degrees of duration angle....now if here, 22 degrees of advance, you will get 22 degrees before tdc and 1.23 after tdc...let me explain? ?
The power is nothing without control
pi? or less, it's not quite easy to understand cos? but I will try
Quote
