scenic ori + egr off.zip
I kindly ask you your opinion to know if the egr and related controls are excluded in the correct way, why? the car continues to go in the recovery due to error or egr. This is a renault scenic 130hp
scenic ori + egr off.zip
I kindly ask you your opinion to know if the egr and related controls are excluded in the correct way, why? the car continues to go in the recovery due to error or egr. This is a renault scenic 130hp
Hi I had a look the controls are excluded well, obviously you have the electrical part fails....
Many thanks max75 the electrical part s? that gave already? problems in fact, my friend wanted to delete it just for that and I think that excluding the controls from the map was like not to have ir? the electric part. Pu? be that is excluded, but remained stuck open, and then go again in recovery for data-busted in the intake?
Let me give you na straight..Originally Written by Errecinque
s? the problem and the electrical part
take a 39ohm resistor 5W and you're set..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
I am generally the first to exclude the control ...otherwise the change ? insignificant....
? true you are right but don't do it's job it was to make in favour to a friend and to get me a p? experience...as soon as I have time, I remove that and see what I find. thanks
are you sure ? what is the problem? I know that on edc16c36 renault after writing forgiveness encoding the injectors and pump ? venno in recovery , the car can start or not, and if it doesn't turn out well.. what did you use to write?
In the mod postat the EGR and closed well.
This is a smplicissima EDC16C3.
On these you can "only" miss encoding the injectors.
On a Trafic with EDC16C33 I ativatto the limiter km to 100km/h that' after I managed to disinescare from the map.
On the Vivaro with EDC16C36 I lost all the codes and now I'm waiting for the Tech-2 for riprogramarla.
Already that I wrote all this, you dyke-also' that' on a Kangoo old DCM 2.1 after you have written the mod, and andatto all well and good, but when I wanted to turn on the car, I had no more the ecu.
Forcing the writing I was able to pick her up, but choosing the driver of the Megane with the same unit...
All of this always via OBD.
I know that I have to stay away from the Renault (Renault)
From now on,' I do, but only the old EDC15 and EDC16C3 via OBD and the EDC16+ only BDM
Sorry for the little offtopic, but maybe someone will be useful this information...
Thanks a lot for the info guys....in the possibility? since that's not me ? ever.... the resistance to be placed in line with the positive that goes to the starter motor of the egr right?
Will update on the situation more? precisely. Then, in the diagnosis the duty cycle of the egr remains at 0% the target instead varies. The pi errors? accurate P0409 egr error sensor and P403 command the egr. What do you think
Quote
