Read write Marelli 8F2.P2

[giama]

hello I don't know if you can see the photos, I have sent a couple where you can see in the needles of the e xxx, where point (not ? own perfect vision, but you understand) and in the other the type of ecu, read, try to compare with your

but the schedule spring for the template are already delivered with the needles installed or are to be welded diy? thanks

[ake85]

the schedule in the spring are included in the template (at least to me have given a template with schedule spring)...and the needles are already? beautiful welded them otherwise you have to solder it alone...

[giama]

I still can't see the photos because? they still have not arrived at the exact limit...I can just see it, and I tell you...anyway, the links that I have done are all spot-on and I'm still banging his head even now me ? the idea of having removed the resistance wrong...my ECU ? NEVERTHELESS-6JF P3
can you please post a photo of the ecu Annex 8611

then, in a 6jf not a marelli 8 but have you read that type processor mounts

[sisco]

for giama'a needles soldered them to my colleague in my case, and for the processor I do not know how know what? (I am less than a beginner) for all those who have looked at the image of the schedule, I have to say that l? you can not see the adapter (why? I had put it) but I remembered that cos? he did not read, then when I put it in the middle of the adapter, I then read (without food the adattatoare of course)

[giama]

for giama'a needles soldered them to my colleague in my case, and for the processor I do not know how know what? (I am less than a beginner) for all those who have looked at the image of the schedule, I have to say that l? you can not see the adapter (why? I had put it) but I remembered that cos? he did not read, then when I put it in the middle of the adapter, I then read (without food the adattatoare of course)

I'm sorry, but I still haven't figured out which central speaks 6jf. 6f3 8f2.8df.8ds..with regards To the n.processor once you open the central and written over the processor mpc 5565. Etc etc

[sisco]

I'm sorry, but I still haven't figured out which central speaks 6jf. 6f3 8f2.8df.8ds..with regards To the n.processor once you open the central and written over the processor mpc 5565. Etc etc

hello giama'a the post ? for the 8f2 photos posted by me are of a mjd6f3hw03p I just thought that because it was always a marelli couldn't help the user ake85 that st? having difficulty?, sorry if I created confusion

[giama]

But I figured for me it's not c'? problem .indeed, forgive me if I am allowed.then the needles were soldered diy.

[sisco]

But I figured for me it's not c'? problem .indeed, forgive me if I am allowed.then the needles were soldered diy.

you are not perfettissimi but those 2 times that we have used have worked well

[ake85]

hello giama'a the post ? for the 8f2 photos posted by me are of a mjd6f3hw03p I just thought that because it was always a marelli couldn't help the user ake85 that st? having difficulty?, sorry if I created confusion

I'm not having difficulty? I had difficulty? now I understand the problem of reading in the bdm and the keen eye of a friend of me pointed out anyway, thanks for the thought

[giama]

I'm not having difficulty? I had difficulty? now I understand the problem of reading in the bdm and the keen eye of a friend of me pointed out anyway, thanks for the thought

I'm sorry, but what was the problem?