post a picture so at least you have a way to see...IMG_0357.jpgIMG_0357.jpg
post a picture so at least you have a way to see...IMG_0357.jpgIMG_0357.jpg
for me the problem of my cock, then maybe I'm wrong ? that on the label gallo wrote v54 but really? ? a v53 modified to make it work on windows 7...then as I pointed out to my friend when he installed it he sent me the date back two years now and still makes me not always but every so often goes berserk...only that I do not know who can? help me in this...I have heard always reading on various forums of some who have changed many things on the inside!!!
hello giama'a adapters are needed in case you want to solder the pin strip directly on the pitch, which must be connected to the fact that the adapter...the schedule is only used to do soldering in the ecu, but given that I do not makes contact well I'll definitely solder the pin and hope that makes me a contact...and anyway let it be the v54 my personal experience does not ? for anything reliable then everyone has different experiences.
p.s. if you have the cock you can find all the documents in the pdf that explains what they are for
the exact means those which can be used not only for the bosch, but also for other just not the bosch powered by a 12 volt, while for others it is not so simple
ok ake85 however, six managed to read it by connecting it in line k which cable kit did you use ? the one with the cable perl boot edc17 or the otherOriginally Written by ake85
the cable where there are more wires (for edc17 exact) at the end of this cursed marelli the read...but it does not end here, I have to find a solution to read in bdm why? ? always pi? sure...sooner or later I win I could not? and should not win her...
p.s. the wire of the k-line ? the green wire is not blue as it says in the manual are two green wires) and should be connected to the pin 88
I don't understand a thing, forgive my insistence, but have you tried to connect the other wiring kit with just a few wires to be clear
no I have the wiring connected to the wires that I just said (the one for the edc17)...the wiring that you say you cut everything and made a change since that was not the 12 volt
strange wiring I have in my cock are both with 12v power supply as soon as I can you please post some pictures
yes, I know that both are 12 volt but a wiring harness that I had was burnt terracotta
Write permission
Quote