ops, obviously, is the usb cable
ops, obviously, is the usb cable
the procedure that I have done ? the same...I connect my flat, adapter, cmd, and other flat...the food, the rooster and the food control unit point the needles but nothing other than the law is maledettaaaaaaaaaaaaaaaaaa...I said I throw it out for sure...the only remains for me to solder the strip so at least I'm sure they make contact on a pitch...I also would buy the ktag but like ugo are always clones then you never know what will happen you just have to be lucky
on one thing I am certain is that I do all the right connections...I have noticed that when out the needles from the pitch I want to see the symbol of the rooster any damage etc then poggio needles and makes me a different sound when you put a usb adapter and then the links are all right, and this program isn't right...tomorrow I try to weld the strip hindsight I throw it
now I'm trying to read it online-k...I connect the pin 23 and 50 to the positive pin 1 to ground and pin 88 to the line-k...I plug it in the usb socket, the adapter obd al gallo power supply 13 volts select driver model fiat auto point and do a selection of drivers...now he tells me he has changed error tells me error send wake...
there are two things or accidentally select the driver ? a NEVERTHELESS-6JF - point 1.3 SDE EU4 EOBD B_CAN and I selection as a driver 1.3 NEVERTHELESS, 6J IAW and it makes me this error, or the cock I put it in the oven along with the potatoes
at the end mister sandro can read the file...on the documents of gallo said that the wire of the k-line ? blue but really? not ? blue, but green...connected everything is fine reading time of 30 minutes loaded on the ecm and found the driver...who takes the win, I thank you all in particular ugoboss
p.s. there is always the problem of the famous reading in the bdm because I do everything well, but not law, at least I had proof that the cock is working and that the ecu is not ? cookedIMG_0363.jpgIMG_0363.jpg
sorry, but if a person has the template more of schedule spring to read in the bdm, but what's the use of adapters that are found in the package of the cock? you will need to connect to the same?Originally Written by ake85
serves only the adapter that from fgtech goes to the e xxx,which also leads l power supply
you mean l adapter with led that serves for the bosch . as soon as I can place a few photos.
hello ake85 in to follow the discussion to me ? come in mind one thing, the resistance that you have unsoldered ? the one that is right? and close them ? are you all right? (I mean where you unsoldered)
IMG_0349.jpg
I have put two identical photos this ? another photo where you can see it even better
Write permission
Quote