Read write Marelli 8F2.P2

[ake85]

at the end mister sandro can read the file...on the documents of gallo said that the wire of the k-line ? blue but really? not ? blue, but green...connected everything is fine reading time of 30 minutes loaded on the ecm and found the driver...who takes the win, I thank you all in particular ugoboss

p.s. there is always the problem of the famous reading in the bdm because I do everything well, but not law, at least I had proof that the cock is working and that the ecu is not ? cookedIMG_0363.jpgIMG_0363.jpg

[sisco]

hello ake85 in to follow the discussion to me ? come in mind one thing, the resistance that you have unsoldered ? the one that is right? and close them ? are you all right? (I mean where you unsoldered)

[ake85]

post a picture so at least you have a way to see...IMG_0357.jpgIMG_0357.jpg

[ake85]

IMG_0349.jpg

I have put two identical photos this ? another photo where you can see it even better

[ake85]

for me the problem of my cock, then maybe I'm wrong ? that on the label gallo wrote v54 but really? ? a v53 modified to make it work on windows 7...then as I pointed out to my friend when he installed it he sent me the date back two years now and still makes me not always but every so often goes berserk...only that I do not know who can? help me in this...I have heard always reading on various forums of some who have changed many things on the inside!!!

[giama]

at the end mister sandro can read the file...on the documents of gallo said that the wire of the k-line ? blue but really? not ? blue, but green...connected everything is fine reading time of 30 minutes loaded on the ecm and found the driver...who takes the win, I thank you all in particular ugoboss

p.s. there is always the problem of the famous reading in the bdm because I do everything well, but not law, at least I had proof that the cock is working and that the ecu is not ? cookedIMG_0363.jpgIMG_0363.jpg

sorry, but if a person has the template more of schedule spring to read in the bdm, but what's the use of adapters that are found in the package of the cock? you will need to connect to the same?

[guidotacco]

sorry, but if a person has the template more of schedule spring to read in the bdm, but what's the use of adapters that are found in the package of the cock? you will need to connect to the same?

serves only the adapter that from fgtech goes to the e xxx,which also leads l power supply

[ake85]

hello giama'a adapters are needed in case you want to solder the pin strip directly on the pitch, which must be connected to the fact that the adapter...the schedule is only used to do soldering in the ecu, but given that I do not makes contact well I'll definitely solder the pin and hope that makes me a contact...and anyway let it be the v54 my personal experience does not ? for anything reliable then everyone has different experiences.
p.s. if you have the cock you can find all the documents in the pdf that explains what they are for

[giama]

serves only the adapter that from fgtech goes to the e xxx,which also leads l power supply

you mean l adapter with led that serves for the bosch . as soon as I can place a few photos.

[ake85]

the exact means those which can be used not only for the bosch, but also for other just not the bosch powered by a 12 volt, while for others it is not so simple