hello, I think I understood what you want to do, at the bottom there are 2 buttons "ori" and "mod" click on one of the 2, and with the arrows that you use usually move the map, you'll see that it moves only a map, when they are on top of the other, then click again on the button, so? they move together again, if you want to come back as in origin click on the 2 arrows (red and blue).
hello I hope I helped you
*sisco
I do not quite understand your explanation. I have now made a sketch, then I think it will be? wasier. Watch the sktech at the top you will see two "maps" one ? color blue (map), and one with the color red (map B)
Both of the maps, for example, are of the same typ of engine, but on diffrent places in the software.
Now I want to move the map so that it is exactly above the other in such a way that you can? see directly increases! (as shown in the photo below)
This ? possible with the ECM or not?
some programms hexagonal like UltraEdit (ultra compare) pu? make a similar solution, but only in hexadecimal.
I'm looking for a mapping tool that offers this functionality?. Supports ECM?
example.JPG
as you said sisco certain that you can? do
however, if you stop with the pointer on the buttons will appear as the description of their function
on ECM, you can make it in 2D
in the bottom right, you will find two buttons with a padlock and the written GOLDS on one and MOD on the other, these are for holding in position the map ori or the mod
then you can move around as you normally do, but only the one that is not locked against
hello Chippy0815 I understood perfectly what you want to do, perhaps I could explain, Exelion1986 ? pi status? clear, in any case, if you play with the buttons ori and mod in 2d, you understand very well, I have attached a imageOriginally Written by Chippy0815
*sisco
ok my friend, thanks for your help.
Will try? and report back if you will? or no
A problem ? that I can not see the arrivals (attachemendts) also my I can't open.
I always get the message that I do not have the permission to look and what do I have to register?!?
Maybe someone can? to solve this problem?
to be able to see the images, you have to reach a certain number of useful messages, ecm, I say to you still working on the buttons "gold" and "mod" (the ones with the lock in the bottom in the 2D window)*sisco
ok my friend, thanks for your help.
Will try? and report back if you will? or no
A problem ? that I can not see the arrivals (attachemendts) also my I can't open.
I always get the message that I do not have the permission to look and what do I have to register?!?
Maybe someone can? to solve this problem?
Good morning to all!! Kindly to me who can? help to compare the two maps on the ecm?Understand if they have the same sw and id?
I have a modified file, but I don't know how to find the original!! who can? help me? Thanks!!
Write permission
Quote