problem injectors bosch edc16c34 citroen c4

[warhead]

hello,as the title suggests I have a problem with a citroen c4 bosh edc16c34 of a friend of mine,in practice, I closed the egr, but when I have it in writing (galletto v54)c'? been a problem in the wait for 180 seconds with the ignition switched off and 180 in the control panel is on,the program ? locked (program not responding) and I know that I lost the coding injectors.now the car part,but I fault the engine management with a written service on, and I do not exceed 3000 rpm,if I turn off and power back up okay without any light,only to reappear after that ? some of them have been stopped...I tried to do the encoding with lexia and bosh but nothing the defect remains..c'? someone who can tell me how should I do??
thanks a lot..

[oakley1]

Lost codes injectors..... Not you had made them save the cock before reading the flash

[warhead]

but in reading did not ask me anything,and ? everything was in good order...but then I should not be able to encode them with the lexia or bosh if that ? the problem?

[ugoboss]

if you have made a diagnosis, you should have seen that type of error you have in the unit.

[polini]

hello,as the title suggests I have a problem with a citroen c4 bosh edc16c34 of a friend of mine,in practice, I closed the egr, but when I have it in writing (galletto v54)c'? been a problem in the wait for 180 seconds with the ignition switched off and 180 in the control panel is on,the program ? locked (program not responding) and I know that I lost the coding injectors.now the car part,but I fault the engine management with a written service on, and I do not exceed 3000 rpm,if I turn off and power back up okay without any light,only to reappear after that ? some of them have been stopped...I tried to do the encoding with lexia and bosh but nothing the defect remains..c'? someone who can tell me how should I do??
thanks a lot..

To me ? happened a couple of times on the mazda 3 1.6 110cv dpf same problem as you... but I have simply rewritten the files and ? everything was in good order

[warhead]

it gives me telecodifica injector,but also that the gates and after you enter the codes for the injectors,(which, however, in diagnosis are also stored when you turn on the light)once put in motion will return the problem

[warhead]

To me ? happened a couple of times on the mazda 3 1.6 110cv dpf same problem as you... but I have simply rewritten the files and ? everything was in good order

I tried more times to rewrite the file ori...nothing!!

[ugoboss]

the injectors are stored in the e2prom no in flash, then rewrite the file does nothing, you should have done a full read in the bdm and rewriting that resolve.

[warhead]

ok,but I made it,now how should I do to solve this problem??one way we will be...at least I hope!!!

[ugoboss]

I believe that a solution is to go in the dealership citroen.