Hi to all my name is salvatore...working in the workshop for 4 years and starting to work with the electronics of the cars I'm passionate very. A friend gave me a small manual (ecm 2001)..from a rookie in the industry I wanted to ask you, which program would you recommend for me to start infarinarmi with this world.. for the moment I thank you
Hello Unless good continuation
c and someone gives me some clarification??please
ECM titanium and the galletto v54, and you are affixed, there are manuals and then on this wonderful forum there is everything you need.........
Starts from the basics and you will slowly begin to understand its operation.I'd recommend you to follow the n course.
thanks frenk85 where can I get this equipment
what course should I follow? thanks againOriginally Written by frenk85
a course for the use of programs of this type and understand the operation of the electronics applied to engines
you can ask the administrators, I think.if you want to "play" just a smattering that you can find on the net or in the forum,if you instead must become a "work" things change.this is my opinion,it is obvious!
then frenk85 are sincere I would like to start to throw me in this world..but I read on the network I read so many things about which you can do the engine management what I didn't understand and where to take those function (e.g. egr) in the map. to ****llo mechanical there are then I need the electronic part.the mapper who comes to me in the workshop doesn't talk much . now my question is where can I find something that tells me to work on this feature, you need to go in this part of the map.
are sincere too!there is a sudden and ephemeral!....
when you open a map that is in 2d-to-3d-esa-or grid opens up a world of calculations,numbers, and curves,if you don't know where to put the "hands"I see it difficult, if not impossible to work with it................the mapper will not tell you never ever dova go to work,as well as the network.
what I can tell you is it begins to read the eprom (your car for example)with the galletto or similar, open the file with the ecm and give it a read and then email the file and let's see if we can give you a hand all together! so to give you at least a basis from which to work.
Week next, we take this cock that at the moment everything is closed. The function table from the manual that I studied and very simple .I repeat to you what I don't know, and how functions are called, which as I understand are named for the number
Write permission
Quote
