Scodifica Citroen C3 Pluriel

[Macchinista]

Hello to all. I have a problem on a Citroen C3 Pluriel 1.4 HDI 2008 with ecu Bosch EDC16C34. I arrived in the workshop with the ECU motor and the ABS ECU is completely dead. I have to say that the ECU engine was no longer in BDM so I could make a clone of the ecu. So I took to destroy a Ecu the engine and ABS Ecu of the same type of car and I scodificato Total the ecu socket to collapse. The problem is that now remains in the diagnosis that the ecu the engine is not communicating on the CAN with the other ECU and the car does not even start. I find this error in the engine control Unit, both in the ABS-Ecu in the BSI.

It is possible that we should do a line for alignment type, as it is for the proxy FIAT?

[todos]

hello, see that the abs are not all equal to just changing a number of the abs, the car won't start, if you want to try you have to jumper the can line of the plug of the abs and see if it communicates with other ecu...

[Macchinista]

Already tried to jump the CAN, you CAN, but nothing to do always the same errors!

[leo_sg]

Strange that both of the control units fail together, or no?

[Macchinista]

Yet it is successful! 😃 When I received the car with the tow truck, I could not make a diagnosis nor abs nor engine! Tried the ecu the engine on the bench at the pin out of nowhere! Tried bdm anything! Completely death! Now after having them replaced I diagnosis in all but there is still the problem! 😞 I should add that the ecu of the engine that I found in the replacement differs to some number from the original but it is always a PSA 1.4 HDI.