iaw 5af pe

[guidotacco]

someone of you has experience with ecu marelli iaw 5af sk of a panda natural power...is it possible to replace it with a 5af pe?if you cofa, you need to do...just change the software and riverginarla?or e2prom and flash?with that I can read the e2prom?thanks

[carlo abarth]

it takes the dedicated..a friend of me l afece a month ago with the marelli cl*ne!!

[todos]

Hello, 5af pe you can turn in your 5af sk you just have to check if the hw is the same, as usually the 5af sk hw and 606 or 607 himself 5af pe must have the same hw, I usually turn the 5af n8 in sk because year the same hw....

[todos]

As it says in todos the only thing that you need to check is the vereione hw, 606 mounts a micro different from the 607, if yours is a hw606 you can clone on a 59f m3 hw002, if you hw607 you can also use a 59f hw 101.
With tool specific you read flash and eeprom from the old and write the new one, or if you don't have the specific tool, and if you hw607 with the cock make the hole in the boot, you do the virgin and the write the software 5ak sk found somewhere.

If you should serve, I should have somewhere the software of the 5af pe that of sk.

Read my post talking about hw and not micro

[guidotacco]

sorry is a 5af p3 hw 603,you know that the micro mounts? st10f168?thanks

[Tricore80]

hello, you can replace it with a 59f hw303 you can make a clone with a cock into a boot-total read by 320kb "recommended" or with the tool marelli 59f, and the problem is that if you mount a 59f hw303 then no longer makes the diagnosis, but the car part lights off all regular. Greetings.