After a document is read on line courses basic to begin to understand something,here, happily, I open the original map with the titanium and I find a map never seen until now.
MOTOR TORQUE:
The required torque duranete the standard terms and conditions
Limiter maximum torque
Maximum torque of the first gear
Maximum torque of the second gear
Maximum torque third gear
Maximum torque quata gear
Maximum torque of the fifth gear
Maximum torque of the sixth gear
Maximum torque in reverse
torque during start-up f(RPM,ECT)
The required torque during the acceleration
The required torque to the functionality sports
The required torque to the functionality sports B
AIR CONTROL:
Amount of gas reintroduced
Percentage valve opening
INJECTION SYSTEM:
Limiter, smoke - threshold lambda top
Limiter, smoke - threshold lambda lower
Fuel amount injected as a f(RPM,Trq)
Injection time
Phase - injection main injection map base 1
Phase - injection main injection map base 2
Phase - injection main injection map base 3
Phase - injection main injection map base 4
Phase - injection main injection map base 5
TURBO:
Control of variable geometry (VGT)
Turbo pressure
Limiter turbo pressure f(APS)
Limiter pressure turbo
RAIL:
Rail Pressure
Limiter Rail pressure f(RPM, T_FUEL)
Limiter Rail pressure f(RPM, Q_FUEL)
LIMITERS:
Speed limiter
All that I ask if it is possible...it is an advice on what to touch and more or less than you? I say immediately that I am not a trainer and still do another job, and this mapping I would like to do it on my 147 and I ask for 400/500 euros I would prefer to do it alone the mapping.
So if someone can give me some advice I would be a great pleasure...otherwise, thanks all the same!
PS:If you don't want to tell me what percentage or how to intervene....at least what tocchereste you
Quote
