Good morning,
I have a problem with the egr on this car.
I tried to disable it in the classic method, paving the panettone (I read the full bdm file then are two series of curves)
you can find the backup in bdm in the file section of the original.
After 2 days I passed through the closure, the machine has the same problem.
Go into recovery with error P0401.
anyone has ever done it?
thanks in advance.
Alllego flash ori saab 031-999 bdm riginale_Flash.rar
In total there are 3 series..Originally Written by coma
search in the esa 119C you'll be surprised..
Let me know
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Yes.....very surprised. Thanks for sharing Cinqueturbo
Hi,thanks for the info, but I have to look for the value or the address?
because 119c (address) I do not see anything
esa stands for hexadecimal..
of course, display a 16-bit motorola
Cattura.JPG
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
ok. thanks for the time.
I'll try Saturday when it is the customer.
good day to all I think that it could be a mechanical problem, I think, is the pressure sensor mounted behind the intake manifold ,that sensor gets dirty and does not read pressure well then the error p0401 , smontalo ripoliscilo well and rimontalo
Of course, all the sensors have to be perfectly working otherwise you dab the wound with vinegar
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Functional and clean
You check the sensor located on the intake manifold.
Quote
