problem pegeout 1.4 hdi 2007

[vittoriopl]

hi to all
I am facing a problem with this car that goes in motion but not exceeding 3000 rpm.
I will give you a summary of what happened:
the car stopped and a year ago for the street without giving more signs of life, after that we took it to a mechanic in to pull out the ecu and have come to the tap pole in the positive of the battery and, as a consequence, and burned.
after various trips that sie made the ecu is the old one that we bought and the replacement, also of the bsm (the box inside the engine compartment) and finally now the car is in motion, but the surprise does not exceed 3000 rpm.
in diagnosis there 3 errors:
p0603 error memory kam/eeprom
p1600 ecu
p1613 ecu configuration
we tried to encode the injectors, but the operation is not successful.
do you have any idea?
advice?
thanks to all

[passione motori]

Hello, need the Lexia to code the ecu, then what's + important that the ecu mounts..........

[vittoriopl]

Hello and thanks for the reply.
The drive hello.na ecu Bosch dc16c34.
Encoding the proven also a mechanic with equipment much more professional my but not even.
With kess v2 you can't code the injectors?

[egs]

On that machine coding injectors it is not a simple matter and easy to do. Make sure with the original instrument, many of the diagnosis does not make. Do you do an alignment in the peugeot and do the encoding injectors.

[legendaryslave]

You have to put affixed to the vehicle configuration

[sportknight]

you have to bring it to the peugeot or take the lexia

[vittoriopl]

thanks to all for the answers.
some of the problems have solved them, the only one that remains for me and this injectors.
when I go to encode the diagnosis answer me the engine code wrong you will be connected with a generic protocol.
and normal?

[cinqueturbo]

I wondered but you have copied the ecu burned out or you started from a compatible..

that is, by copying the e2Prom or adiri tura moving it directly was already in motion and you have everything configured.. then if it had the same Software, not wax, nothing more to retouch..
otherwise, it was enough to write the software to his and closed your all...

[vittoriopl]

the eprom and been moved then all the rest and was bekappato from the old and writing to the new.
1 question in the old is missing the eprom in the other, remembering you retrieve the codes?

[vittoriopl]

guys I was thinking about one thing.
but if you rivergina the ecu should make the car learning all the systems including the injectors?