Hi guys,
I have seen a device that backs the scodifica immo of this ecu ( 5sf8, 5sf9, 8fmw, 8gsw, 8gsf, 9gf, 6f3, 8f2, 8f3 ) directly from the port to the OBD.
you can do this with some program and/or to implement this dispositovo??
if yes, with what...and how?
quoteoftheday
the scodifica total when it is supposed to on the flash you can do it also in the serial
read the flash,scodifichi with programs like time,immodecoder,meucci, etc.. and then re-enter
great
then, on a nevertheless, 6f3 should be brought to zero addresses 0898F8 AND 0898F9 ? (on the various programs, I MDJ6F3 is the same?)
but so is partial?
thanks
you said the program if it is total or partial, and in that the memory has to be done. The mdj6f3 is the 6f3
It is possible to make the scodifica total both on the flash and on the e2p, on these units. There are also tools such as The I/O Terminal that is without the aid of additional software. Others also but this one is the best, considering that he also has the protocols dedicated for each type of Controller if Marelli, Siemens, Denso etc...
the 5sf I don't think that they make the total file correct me if I'm wrong ..I believe that only with the shedino you can!!
What is a hare? A rabbit Abarth
I understand, I was interested in the scodifica parziele for the replacement of the ecu and/or insert the code of new keys that are not virgins (already with code card)
Is the partial you can make it but I have to find a programmer that serial you read the E2P. However, there is still no file scodifica for the 5SF, I agree, only with the emulator and for the 5SF9 does not work on all versions of sw.
Remains the spy code on the framework
Should I do a partial on a gpunto 1.2 5sf once read in boot which program the ago, there is no one that I can give an advice?
Quote
