simens sid 206 fiesta and mapping

[tekyla]

Good morning to all
I open new discussion about sid 206 fiesta 1.4 tdci
reading the map I tried to delete the egr tramide 2d I lowered only 4 ipanettoni but there would be 4 other lower?I attach the file
you can give him an eye?
wandering in the forum I found this info about always on the sid 206 and that is, according to many users, addresses are essential to increase to make the mod.
045b00 lim torque
04c812 x 9 maps pedal .
049a92 x 8 press rail
4f4ba lim pres rail
056312 x 7 pres turbo
057c12 x 2 lim pres turbo
057df2 tt maps . diesel
065172 x 2 injection
about the address 045b00 in 2d I can only see a set peaks where it ends 045B05? or more?
same thing for lim press the rail ends 04F50D?
sorry for the questions, maybe idiotic, but being a beginner, if I don't ask I can't be sure if they are as they should be.ford sid206.rar

ok place the file ori and mod the egr, fap and rolling code one fact with time the other with ecusafe.

the control unit qestione and' the afore-mentioned sliced:

FIESTA 1.4 TDCI 2008
NAME:F14_3D6B
SIMENS SID 206 5WS40584B-T
EPPROM 29BDD160GB
CKS 3D6B
ECM 996
BDM44
KESS 129

give me a your opinion and help?
graz in advance.

[pdtechnology]

hello then I hope you have not loaded the map....with regard to the dpf it once or ecusafe work...then the mod that you did not go well and forgive ori 04b598 and the like egr off has not been made to mod the rail pressure and not to change the limiter....some of the maps you have changed the related no by review

[tekyla]

Ok,and I then by the ori ,but what about the similar we mean the map correction?
If you these maps should not come into operation at certain times as an example when the control unit goes into recovery?
The other thing the egr then how do you close the map?

[sportknight]

for the egr you can stccare the socket, and delete the dtc

[tekyla]

Good evening to all, as it is recommended to attach the mod sid 206 fiesta 1.4 tdci 68cv started by ori,what do you think?
regarding the related ecm asks me to save the changes or corrections on them, and I told you.
I'm not understanding something I'm still in the middle of the c....?
thank you in advance

[sportknight]

if you want a board without incasinarti greatly increases the map rail and the limiter that is after,the injection times,the pressure to the turbo and remove the egr or removing the dtc and disconnecting the outlet(dtc remover free should do it) and already get good results

[clabsport]

if you want a board without incasinarti greatly increases the map rail and the limiter that is after,the injection times,the pressure to the turbo and remove the egr or removing the dtc and disconnecting the outlet(dtc remover free should do it) and already get good results

That I know of just makes the series 803 and 803A, when we speak of V1.02 or we have a higher version?

[tekyla]

good evening to all which to use for sid 206?

aiutooooo

[tekyla]

the city of graz. for me considered sportknight lighthouse' as you say I hope tonight then the place .
Time okay to reset the rolling code?
what do you advise me?

[sportknight]

let it loose the rolling code,maximum safety facts to read before you write and compare it with that which you have read before