problem reset service ford kuga

[giuseppe89]

Hello to all tonight after the cutting is complete on a new Ford kuga 2.0 tdci 136 hp I go to reset the Service with the classic procedure "clutch pedal and brake pedal" but nienteil service does not want to know of zero.I made the diagnosis a little everywhere by the injection framework, students at the body but without the errors relating to...only a few error low power in the abs and the Can communication in the framework tools. I always reset the Service to this machine, now I don't know what he had. Someone has experiences about that? Thanks

[fuorigiri]

hello, see if maybe in the engine diagnostics to the law, both the clutch pedal and the one of the brake

[egs]

Try to perform the procedure with caution and behind closed doors.

[giuseppe89]

Everything is resolved,the switches were ok,in diagnosis today, however, I detected an error of Can line in the instrument panel after the fault is cleared, the procedure is successful for luck! Thanks to all for the suggestions.

[tecnoracing]

sorry watch the procedure and brake pedal and accelerator no clutch

[giuseppe89]

Yes tecnoracing I was wrong to write the post in a hurry,the service reset is the classic ford brake throttle...