Hi guys I open this thread for ask you if someone of you raising the pressure of the turbo ? ran into this problem. Now I would like to know the address to lift the limit of the turbo pressure to snooze a bit.
Thanks
Hi guys I open this thread for ask you if someone of you raising the pressure of the turbo ? ran into this problem. Now I would like to know the address to lift the limit of the turbo pressure to snooze a bit.
Thanks
if I'm not mistaken you can't do it why? l 70cv and the turbine is not operated using the control unit, and automatically managed
yeah, as I said in the other discussion from what I know there is only a limiter to a single bit to the maximum pressureOriginally Written by tuningecu
the only way to increase the pressure to your liking ? to act on the adjustment of the wastegate, unless you change the whole turbocharger assembly
Guys but have you read what he wrote in the title of the discussion Ralph85 ?
" Limiter pressure turbo lancia ypsilon multijet 70 hp "
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Email the file Ori..
see in the bank, and paste here the link, or post the data..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
in fact, I said that there is the limitation
I just wanted to clarify the discourse on management mechanical
however, now that I think of it, in reference to the file from the other discussion:
http://www.professionalchiptuning.ne...cv-vt8537.html
two bits of the maximum pressure value in the light of 1500 mbar addresses 0624E0 and 062536
Well thank you, the first I knew him the second no ... but uses the same values of conversion.?
of course both have the value 1500 in the clear
Write permission
Quote
