Punto 1.8 HGT Problems starting

[Marcuc]

Hi all.. I Hope someone of you have this problem why? I don't know what to check.
I have a customer that has as the title of a Point HGT 2001. This machine is equipped with a control Unit Hitachi..
In other words, the machine is fine but sometimes it happens that when you want to put in motion the light comes on engine red and the machine will not. I made a diagnosis with Autocom and completely errors that I get from these are:
-No symptoms central computer
-Error CAN, signal implausible
-Minicriptaggio: incorrect code, the signal below the limit allowed
-Signal implausible transponder key

unfortunately, the codes of the errors in the autocom is not them to me.
in order to restart the car I have to detach and reattach any fuse for the electronic management of the engine and, strangely, after you turn off the light engine, the car starts..
the problem then is not doing it for days and sometimes for months.
anyone of you has experience with these machines?
I'm not, I never put hands and I do not know the defects of these machines.
Appearance your advice
Thank you in advance

[dariuccio]

check the rel? the engine control. what you have described ? the classic defect of rel

[Marcuc]

hello dariuccio..thanks for responding to my computer, however I have changed all the rel? the reds that are on the fuse box of the body and also the ones that are in the engine compartment. I'm waiting for that I get the black ones and we tried again.. I really hope that they are the rel? the problem

[Marcuc]

hello dariuccio I mounted the rel? and so far it has not done me the most is the problem... we hope that you ? resolved

[Marcuc]

Hello Dariuccio.. After you have assembled all of the rel? the new machine had no more starting problems..
We hope that it continues that no reoccurring problems.. Thanks