removing the ecu volvo xc90 year 2003

[rodcraft86]

boys short must? remove the ecu of a xc90 2003, do you know if you need a special key to remove it? should be a edc16c31 not ? wired in kline, thanks to all me7-removal-tool-800x800.jpg this is what I mean

[sno74]

Open the hood on the right c'? a big box, remove the cover inside you will find everything you..............

[rodcraft86]

ok, up to them I had arrived for? my question was about l so as to be able to remove, on youtube I found a video where you use the appropriate wrench to remove and re-seat the ecu, have you made some? you have experience in the matter? the ecu of the video does not seem to edc16, but perhaps in the extraction system ? the same

[sno74]

but I have a xc90 but the ecu the show several times, never had to use special tools my pero mounts edc15........

[rodcraft86]

in the list on the kess as the xc90 I have not edc15, the one in question ? 2.5 163cv, ? like yours?

[sno74]

It is in the boot or fall off the flash read tour..........

[rodcraft86]

ok but how do you know when ? edc15 or 16? from the obd are not able to do anything, the manuals tell me to connect the blue wire from the outside in at the connector to wire the kline

[sno74]

Mail Hw ecu number bosch, I say to you that the eoc mounts................

[msport (exil77grande)]

the 163cv could be both edc16 that edc16 but being in 2003 to 99%, and a edc15,if this is the case, you do not have the kline wired, you have to use the wiring diagram supplied with the programmer who utilize it for reading.

[rodcraft86]

thanks for the help guys, I will keep you updated and crecher? to make a sort of report, for those who can? need