Pinout ME 1.5.5

[tezzero]

I try pinout bosch me 1.5.5 opel astra g 2000 turbo. Thanks

[pixel.nine]

.A503 Control module for cooling ventilator
.X500 Fuse box in passenger compartment
.X502 Connector left A-pillar
.X506 Connector under the dashboard
.X508 Connector below backseat
.X510 Connector on left side of engine compartment
.X512 Connector below the relay box in the engine compartment
A11 ECU
A16 Imobilizer
A20 Tachometer
A21 Speed pilot
A22 A/C
A23 ABS-ECU
A32 Electronic power steering
A42 Engine temperature indicator
A52 Throttle valve control unit
A64 CAN bus wires
A80 Instrument cluster control module
B10 Knock sensor
B14 Camshaft hall sensor
B16 Inductive crankshaft position sensor
B22 Coolant temperature sensor
B30 MAF sensor
B35 Altitude sensor
B48 O2-sensor with pre-heater
B50 O2 sensor after the cat.
B62 MAP-sensor and temperature sensor
Non-Polar Standard Capacitor C10
F - Fuse
F - Fuse by battery
H11 ECU lamp
H22 EOBD lamp
K18 Pump relay
K22 relay System
M11 Fuel pump
M18 Cooling fan
R35 Accelerator pedal sensor
S14 Brake pedal switch
S15 Clutch switch
T53 Ignition bridge
X14 Ground connection
X15 Cable screen
X24 Cable joint
Y11 Injector cyl. 1
Y12 Injector cyl. 2
Y13 Injector cyl. 3
Y14 Injector cyl. 4
Y34 Canister purge valve
Y42 Boost pressure valve

[tezzero]

thanks...a good make..

[kawaracing]

thankss very works