ECUSAFE on Suzuki Grand Vitara

[franky]

Do you have experience of ECUSAFE used for DPF off on Suzuki Grand Vitara DDIS 1900?

[voglioimparare]

Do you have experience of ECUSAFE used for DPF off on Suzuki Grand Vitara DDIS 1900?

does not work,the only one and do it manually. hello

[franky]

you have the addresses of the map on which to operate?
Thanks

[passione motori]

If you erase the dtc from the diagnosis related to the dpf and make replacement dpf, ecusafe works up to euro 4, this ecu flaw in the bdm otherwise in serial not put + into motion because immobilizer........

[franky]

Thanks made in the BDM with BDM100 and CMD1255, deleted all of the DTC, makkina OK. The FAP had emptied about a month.
Do you have a tip to close the EGR ? Addresses map or suitable software for this machine?

[passione motori]

if you search the forum you speak of this family of ecu, and you'll find lots of news, but with the 4 messages that you have to participate in the pi? to see the attachments, if you're in a hurry please contact the service file of the forum......

[legendaryslave]

the council of read it in the bdm as they be well advised colleagues do not know to what extent that soft works well on the management

[franky]

thanks for the advice, I continue to slam into a little head and then I feel the change with the diagnosis.

[Renz80]

I fully agree with legendaryslave

[cinqueturbo]

Made different in the serial..
it is a manual procedure at the end of the writing for learning of the immo..