Opel Meriva 1.3 Multijet 3324M160-01246O204D DPF EGR

[sansec]

Hi, can someone tell me if I did?

The EGR off, DPF off

Thanks.

[Exelion1986]

the egr ? right, for the dpf I could not tell you why? I'm still studying
but the changes you made them by hand, or with some software?

[sansec]

the egr ? right, for the dpf I could not tell you why? I'm still studying
but the changes you made them by hand, or with some software?

I used Time, only that on the ECM, there was not the right driver, and I found one that is compatible.

However, without further testing of the car and diagnosis, and it all seems ok, I was just curious to know if someone who knows more than me could tell me of any errors or deficiencies to improve the file.

Greetings

[ake85]

I then especially on the marelli are many switch off to do...ask for the online service, so once you've seen the file, you will be able to study it and know it well as you do...

[jack91]

With what you read?

[tecnoecu]

hi on some cars of the time is fine, that before writing the file, you must do some of the procedures in the diagnosis

[jovandj]

hi on some cars of the time is fine, that before writing the file, you must do some of the procedures in the diagnosis

Type? ? That procedure? ?

[pdtechnology]

hello sansec the file is fine nn should give you problems the procedures to do before the luca stanca sn the oil change to reset the counter and replacement of the particulate filter to reset the counter of the regenerations then if you want the drivers, compatible c'? use the M13_0c07 opel meriva 75hp good job

[jack91]

what tool did you read it? I have tried with kess v2 can I says error reading number sw and kline error alarm clock